Lattices and graded structures¶
Periodic implicit structures can fill a design envelope with repeated geometry while retaining compact parameters. Available families include gyroid, Schwarz P and diamond structures, with graded gyroid capability. Discover the exact operation IDs and controls in the live feature catalogue.
Use an envelope to define where the structure belongs. Choose its spatial period, material thickness or level parameter as supported, then trim and connect it to the surrounding solid. A graded structure uses a spatially varying control rather than a single uniform value.
Engineering checks¶
Inspect sections in all three directions. Check connectivity to the surrounding body, minimum thickness, small trapped cavities, flow continuity where applicable, and access for the intended manufacturing process. Relative density and passage size are outcomes to measure; a parameter’s numeric value is not a universal density specification.
The smallest feature controls how much export and mesh resolution is required. A coarse preview can hide disconnected walls or closed passages. Compare representative measurements across resolutions before exporting a large model.
For flow or heat-transfer analysis, define the material and fluid volumes explicitly. Decide which details the analysis will resolve and state that decision. A homogenized physical model is not implied simply because the design uses a lattice.
Keep the editable document with the final exported geometry so a later change to period, thickness or envelope can be reproduced. See regions and import/export.