Validate geometry and manufacturing constraints

Validation happens at several levels. Passing one level does not establish the others.

Check

What it establishes

What remains to check

Document validation

Accepted graph structure, references and typed inputs

Evaluated shape and engineering suitability

Evaluation and sections

Visible bodies and sampled geometry

Small unresolved features and export fidelity

Manufacturing checks

Results for the selected limits/rule pack

Actual process, material and supplier qualification

Export checks

Suitability of the produced representation

Mesh quality and solution accuracy

Mesh inspection

Available closure, regions, bounds and quality evidence

Physics setup and convergence

Use validate, manufacturing, manufacturing_pack, evaluate and section through design operations. Inspect each response’s evidence and limitations. Some measurements are approximate or resolution dependent; keep that qualification with the number.

Hard and preferred requirements

A hard requirement determines whether a candidate is acceptable. A preferred target guides comparisons between acceptable candidates. Record the requirement, unit, applicable body or parameter, and how it is checked. Do not silently relax a hard constraint to make an edit pass.

For a cold plate, useful checks include envelope dimensions, minimum wall thickness, port alignment, fluid connectivity and retained material around mounting features. A manufacturing rule pack covers its declared rules; it does not certify every possible production constraint.

When a check fails, report the offending feature or parameter, measured value where available, required bound and proposed correction. Preserve the last valid model. An agent should request the missing engineering requirement rather than inventing a manufacturing tolerance.