MCP_validate_mesh_OctreeSurface

Generated from the central API contract. Availability and permissions are checked by the connected service.

Field

Type / accepted values

Required

Default

Constraints / meaning

size

number or null

No

null

exclusiveMinimum: 0.0; Wall edge length in metres (with adaptive sizing, the largest). Leave out to size the wall for target_cells; set it only when the user fixes a size.

sizing

"adaptive" / "uniform"

No

"adaptive"

adaptive refines size for curvature, sharp edges, narrow gaps and thin walls down to min_size; uniform keeps one edge length.

min_size

number or null

No

null

exclusiveMinimum: 0.0; Smallest curvature-driven edge in metres; default size / 8.

curvature_angle

number or null

No

null

maximum: 90.0; exclusiveMinimum: 0.0; Most surface turning per adaptive edge, in degrees; leave out for the service’s setting (18 by default).

gap_cells

number

No

3.0

minimum: 1.0; maximum: 10.0; Edges across narrow gaps.

feature_angle

number

No

50.0

maximum: 180.0; exclusiveMinimum: 0.0; Sharp-edge detection angle in degrees.

preparation

"auto" / "preserve" / "wrap"

No

"auto"

auto: feature-preserving remesh for clean solids, a voxel wrap for dirty CAD; preserve or wrap force one route.

max_deviation

number or null

No

null

exclusiveMinimum: 0.0; Allowed wall-to-CAD p95 deviation in metres; default two surface sizes.

close_gaps

number or null

No

null

maximum: 20.0; exclusiveMinimum: 0.0; Close fluid gaps narrower than this many first-layer heights. Changes the geometry: use only for an explicit simplification and disclose it.

fidelity

"default" / "high"

No

"default"

high: the wall follows sharp edges and curvature closely (sharp edges restored, creases split, curvature angle 12 degrees unless given); creased walls warp far less, at some cost in the worst cells and about 30-60% more meshing time. Use when the user asks for an exact or high-fidelity wall.

Omission and explicit null are different. Defaults shown are schema defaults; validators may resolve conditional defaults or reject incompatible combinations. See the workflow guide and validate the complete request before submission.