Design with fields

Fields let a design parameter vary through space. They can express a gradual transition, a distance-based influence or a measured distribution without requiring a separate manually edited feature at every location.

Operation family

Purpose

What to check

field.constant

Uniform field

Value and expected input type

field.coordinate, field.ramp

Variation along a direction

Origin, direction and spatial extent

field.distance

Distance relative to a body

Which body and which region matter

field.combine

Combine compatible fields

Operation and units

field.remap_range

Map one value range to another

Source range, target range and outside-range behaviour

field.offset, field.thicken

Use a field to modify a body or thickness

Minimum thickness and resulting topology

field.evaluate, field.gradient

Inspect values or spatial change

Sampling locations and resolution

Discover the exact available operations and input names through the central service’s catalogue design operation. Some inputs accept a scalar while others require a field reference. Read the type instead of relying on the label.

Example: graded thickness

Define the body to be thickened. Build a spatial field that identifies where additional thickness is needed. Remap that field into an engineering thickness range with a strictly positive minimum, then connect it to a compatible thickness operation. Sample the field at known points and inspect sections of the resulting body.

A field inspired by a stress or thermal image is not automatically a validated physical field. Preserve the source, coordinate system, units and interpolation assumptions of any imported distribution. Validate the resulting geometry and run the required analysis before claiming an improvement.

Avoid abrupt or unresolved changes

Large gradients can produce thin necks or rapidly varying features. The preview, export and eventual simulation mesh must resolve the smallest feature that matters. Evaluate representative sections and compare results at a finer export resolution when the design depends on small details.

For agents, record the field’s purpose, its range and units, the affected body, and acceptance checks. This makes a later parameter change interpretable rather than an unexplained modification to a graph.